EARTH STF Sweat & Oil Clear Film 75pcs is a "transparent, efficient oil/sweat-absorbing accessory" designed for daily skin care and makeup maintenance, focusing on "invisible use + strong absorption." Its core features are:

1. Ultra-Thin Transparent Design: The film is made of ultra-thin, high-transparency material—when used on makeup or bare skin, it is nearly invisible, avoiding the "white residue" or "paper marks" left by traditional oil-absorbing papers, and maintaining a natural skin/makeup look.
2. Dual Absorption of Sweat & Oil: Adopts a multi-layer absorbent structure (composed of plant-based fibers and porous pulp)—it can quickly absorb both excess sebum (oil) and surface sweat, solving the problem of "shiny skin" and "makeup melting" at the same time, and keeping the skin matte for 2-3 hours.
3. Gentle & Skin-Friendly Material: Made of 100% plant-derived fibers (e.g., cotton pulp, wood pulp) that are soft and non-irritating—they do not scratch the skin or rub off makeup, and are suitable for even slightly sensitive skin.
4. 75-Piece Practical Pack: Contains 75 sheets, usually in a portable flip-top box or resealable bag—the compact packaging is easy to carry in a purse, makeup bag, or pocket, and the resealable design keeps the remaining sheets dry and hygienic.
5. Wide Application Scenarios: Suitable for bare skin (to control oil and refresh) and made-up skin (to maintain makeup); can be used anytime (e.g., after lunch, during commutes, before meetings) to quickly improve skin texture and makeup durability.

• Made in :Japan

（specific ingredients subject to product packaging; common core components listed below）：
Main Absorbent Material: 100% Plant-Derived Fibers (including Cotton Pulp, Wood Pulp—soft, high-absorbency, and non-irritating); Porous Transparent Paper (enhances transparency and oil/sweat absorption capacity, ensuring the film is thin and invisible).
Packaging Material:
Inner Packaging (for individual sheets, if applicable): Polyethylene (PE) Film (moisture-proof, keeps the film dry before use).
Outer Packaging (flip-top box/resealable bag): Paperboard (recyclable, provides structural support) + Polypropylene (PP) Film (coated on the inner layer for moisture resistance and easy sealing).
Note: No chemical additives (e.g., fragrances, preservatives, bleaches) are added to the oil-absorbing film, ensuring it is gentle for daily use.

Prepare Before Use: Ensure hands are clean and dry (to avoid transferring moisture or dirt to the film or skin). Open the packaging (flip-top box or resealable bag) and take out one sheet—close the packaging immediately to prevent the remaining sheets from absorbing moisture and losing effectiveness.
Apply to Target Areas: Gently press the film onto areas with excess oil or sweat (e.g., forehead, nose, chin, cheeks)—do not rub or wipe the skin (this may smudge makeup or irritate the skin). Focus on the T-zone, which usually produces the most oil.
Press & Remove: Hold the film in place for 2-3 seconds to allow it to fully absorb oil and sweat, then gently peel it off from the edge. You can visually check the absorbed oil (the transparent film will show slight oil stains, indicating effective absorption).
Post-Use Disposal: Dispose of the used film as regular household waste—do not reuse it (reused films lose absorption capacity and may cause bacterial contamination).
Tips for Makeup Users: For heavy makeup (e.g., thick foundation), press the film lightly and quickly to avoid excessive pressure that may rub off makeup. If makeup is slightly smudged after use, touch up with a small amount of powder or foundation.
Note: Do not use on broken skin, wounds, or areas with severe redness/irritation. If skin discomfort occurs (e.g., tightness, itching), stop using immediately.